CE, ISO Certified MBR Sewage Treatment Equipment Water Purifier Water Treatment Water Dispenser
This equipment is an integrated set of water treatment equipment that organically combines MBR membrane separation technology, biological treatment technology and intelligent control technology. It overcomes the shortcomings of traditional sewage treatment process, such as lengthy process, large area and complicated operation and management. The process of the device replaces the secondary sedimentation tank in the traditional process, and it can efficiently perform solid-liquid separation to obtain stable intermediate water for direct use. It can also maintain a high concentration of microorganisms in the biological pool, the process has less residual sludge, extremely effective removal of ammonia nitrogen, effluent suspended solids and turbidity are close to zero. Bacteria and viruses in the effluent are greatly removed, and the effluent water quality is better than the reclaimed water quality standard (more than the national level A standard ).
Technological Process:
Sewage → Grille → Regulating pond → MBR Bioreactor → Discharge(reuse)
1. Temperature: 5ºC~45ºC, average membrane aperture 0.10 μm.
2. PH: 2~12, membrane thickness: 40μm.
3. Outlet water turbidity: <1 NTU , outlet water SS <1mg/L.
4. Membrane area: 8m2, advised gas-water ratio: 25:1~30:1.
5. Operating pressure: -0.01 ~ -0.03MPa.
Features:
1. Because of the high-efficiency solid-liquid separation, it can efficiently remove the SS, colloidal material and dead microbe in the sewage, no need sedimentation tank, or filter device, nor other solid-liquid separation device.
2. The MBR can make the biomass in biological treatment unit maintain high concentration, thus highly improve the volume loading. Meanwhile, the high efficient membrane separation can shorten the HRT. The device is with a compact structure and small space occupation.
3. MBR can filter out bacteria, part of the harmful material such as virus, it can obviously save dosing disinfection dosage, greatly improve the quality of the output water and reduce the operating cost and widen the scope of application of water.
4. Due to the strong interception function of MBR, it can keep the microbe in the reactor to avoid the loss of all kinds of microbe groups, which is good for the growth of the bacteria (such as the Nitrifying bacteria), at the same time, it can lengthen the residence time of difficult degradable macro molecule organics to improve the decomposition so as to make the metabolic system process smoothly. The system has a strong impact resistance and wide suitability
5. It can realize the completely separation of HRT and SRT. By the extended aeration, it can consume the organics, it can theoretically achieve the effect of no excess sludge emissions, thus reduce the surplus sludge treatment costs significantly.
6. The unique mode of operation makes the membrane surface no blocking, and the cleaning interval time is long. The way to clean the membrane is easy, since the membrane module can be separately cleaned, thus, the maintenance is convenience and simple.The module design make the machine flexible, it is easy to expand the volume.
advantages:
1.Save 50% occupying area compared with traditional system.
2.Relative high MLSS value(less than 15g/L)and long residue time for sludge(less than 60days).
3.Stable producing water quality for different inlet water.
4.Less sludge residue reduces cost for sludge treatment.
5.Low energy consumption, simple cleaning and low operation cost.
6.Simple installation ,high degree of automation, simple operation and maintenance, the whole set can be placed underground with auto-control
7.Anti-corrosion carbon steel, stainless steel and FRP structure , long service life
Application:
1. Hotels, restaurants, sanitariums, hospitals.
2. Home communities, villages and towns
3. Stations, airports, harbors,
4. Factories,mines, troops, scenic spots,
5. Industrial organic sewage similar to municipal sewage.
FAQ
1. Q:How to buy your idea products?
A:You can provide us with your water source, water quality, flow rate, floor area and construction materials (please contact us for more information). We will design a plan for you for free.
2. Q:How to pay?
A: TT and L/C are acceptable and TT will be more appreciated.
3. Q:What is the delivery time?
A: It depends on order quantities. Generally speaking, the delivery time will be within 1 to 2 weeks.
4. Q: How to pack the products?
A: We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers.
5. Q: How to keep your equipments from corrosion?
A: We use the world-famous paint, like SigmaCoatings,PainBow,etc. What's more, we paint strictly according to the standard process.
6. Q:How to install after the equipments arriving destination?
A: We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you.
If you have any questions, please contact Diana!
This equipment is an integrated set of water treatment equipment that organically combines MBR membrane separation technology, biological treatment technology and intelligent control technology. It overcomes the shortcomings of traditional sewage treatment process, such as lengthy process, large area and complicated operation and management. The process of the device replaces the secondary sedimentation tank in the traditional process, and it can efficiently perform solid-liquid separation to obtain stable intermediate water for direct use. It can also maintain a high concentration of microorganisms in the biological pool, the process has less residual sludge, extremely effective removal of ammonia nitrogen, effluent suspended solids and turbidity are close to zero. Bacteria and viruses in the effluent are greatly removed, and the effluent water quality is better than the reclaimed water quality standard (more than the national level A standard ).
Project | Inlet water quality | Outlet water quality |
BOD5(mg/L) | ≤200 | ≤20 |
CODcr (mg/L) | ≤450 | ≤90 |
NH3-N(mg/L) | ≤30 | ≤10 |
SS(mg/L) | ≤300 | ≤60 |
number of fecal coliforms(number /L) | ≤500 |
Technological Process:
Sewage → Grille → Regulating pond → MBR Bioreactor → Discharge(reuse)
1. Temperature: 5ºC~45ºC, average membrane aperture 0.10 μm.
2. PH: 2~12, membrane thickness: 40μm.
3. Outlet water turbidity: <1 NTU , outlet water SS <1mg/L.
4. Membrane area: 8m2, advised gas-water ratio: 25:1~30:1.
5. Operating pressure: -0.01 ~ -0.03MPa.
Features:
1. Because of the high-efficiency solid-liquid separation, it can efficiently remove the SS, colloidal material and dead microbe in the sewage, no need sedimentation tank, or filter device, nor other solid-liquid separation device.
2. The MBR can make the biomass in biological treatment unit maintain high concentration, thus highly improve the volume loading. Meanwhile, the high efficient membrane separation can shorten the HRT. The device is with a compact structure and small space occupation.
3. MBR can filter out bacteria, part of the harmful material such as virus, it can obviously save dosing disinfection dosage, greatly improve the quality of the output water and reduce the operating cost and widen the scope of application of water.
4. Due to the strong interception function of MBR, it can keep the microbe in the reactor to avoid the loss of all kinds of microbe groups, which is good for the growth of the bacteria (such as the Nitrifying bacteria), at the same time, it can lengthen the residence time of difficult degradable macro molecule organics to improve the decomposition so as to make the metabolic system process smoothly. The system has a strong impact resistance and wide suitability
5. It can realize the completely separation of HRT and SRT. By the extended aeration, it can consume the organics, it can theoretically achieve the effect of no excess sludge emissions, thus reduce the surplus sludge treatment costs significantly.
6. The unique mode of operation makes the membrane surface no blocking, and the cleaning interval time is long. The way to clean the membrane is easy, since the membrane module can be separately cleaned, thus, the maintenance is convenience and simple.The module design make the machine flexible, it is easy to expand the volume.
advantages:
1.Save 50% occupying area compared with traditional system.
2.Relative high MLSS value(less than 15g/L)and long residue time for sludge(less than 60days).
3.Stable producing water quality for different inlet water.
4.Less sludge residue reduces cost for sludge treatment.
5.Low energy consumption, simple cleaning and low operation cost.
6.Simple installation ,high degree of automation, simple operation and maintenance, the whole set can be placed underground with auto-control
7.Anti-corrosion carbon steel, stainless steel and FRP structure , long service life
Application:
1. Hotels, restaurants, sanitariums, hospitals.
2. Home communities, villages and towns
3. Stations, airports, harbors,
4. Factories,mines, troops, scenic spots,
5. Industrial organic sewage similar to municipal sewage.
FAQ
1. Q:How to buy your idea products?
A:You can provide us with your water source, water quality, flow rate, floor area and construction materials (please contact us for more information). We will design a plan for you for free.
2. Q:How to pay?
A: TT and L/C are acceptable and TT will be more appreciated.
3. Q:What is the delivery time?
A: It depends on order quantities. Generally speaking, the delivery time will be within 1 to 2 weeks.
4. Q: How to pack the products?
A: We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers.
5. Q: How to keep your equipments from corrosion?
A: We use the world-famous paint, like SigmaCoatings,PainBow,etc. What's more, we paint strictly according to the standard process.
6. Q:How to install after the equipments arriving destination?
A: We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you.
If you have any questions, please contact Diana!