Application:
It is for treating the diesel oil,fuel oil,gasoline oil for the generators.
This machine integrates fine filter, high efficiency demulsification and dehydration into one body. This machine, which can remove large amount of water without heating, creates the fastest dehydration speed,
This machine can quickly separate water from the oil, which even contains half water, to attain cleanness of NAS 6 grade, Convenient using with the go-cart model designed. In a word, it is be used for fast removal of water and sediment in fuel oil or light oil which contains large amount of water. 

Working principle:
This machine adopt the coalescence separation filter.
The coalescence filter is processed by a variety of composite materials with a special technology, It has the hydrophilic properties. It can not only filter mechanical impurities, but also can separate the emulsified water from the media by breaking, coalescing. It can coalesce into larger droplets to further the purification medium. 
Oil, water and other liquid droplets are captured by the microfiber in the coalescer, these micron fibers form a tortuous path for the air flow, forcing the solid particles and liquid droplets are captured by microfiber in the inertial impaction, interception and diffusion direct interception,so the surface tension of liquid droplets coalesce into larger droplets due to gravity, and settle to the bottom of the container
Features:

1 TYB series purifier adopt special oil water separator which requires no heating, offering 20 times higher water removing efficiently than over other types of purifiers.
2 As no heating is needed, the additives in the oil are well prevented from degradation or deterioration.
3 Easy-to-operate, water can be discharged online automatically without the presence of operators.
4 Low operation cost, 20%-40% lower than vacuum purifier, centrifugal purifier and filter press. 

Parameters:
 

Operation Instruction

1 put the machine on a place where is flatness, check whether any parts of the machine is lax, especially for the connected parts between generator and oil pump.
2 connect the power supply correctly, check whether the round direction of the oil pump is correct, if not, pls exchange the power phases.
3 connect the oil inlet pipe and oil outlet pipe tightened. Note the must tighten the oil outlet pipe to oil outlet valve, otherwise, the oil outlet pipe will be pushed off when the pressure is so high.
4 when tighten the oil inlet pipe and oil outlet pipe, open the generator, the oil pump begin to work normally, the purified oil will be fine through the filters.
5 when need to suck the oil in another container as the oil in one container is sucked completely, pls do it as soon as possible for avoiding the oil pump running without oil for a long time. If you can not do it quickly, pls stop the machine, and when the oil inlet pipe is tightened well, start the machine.
 

Maintenance

1 If the oil raise so high when adding the oil, it will cause the temperature of the generator improve quickly, and the noise of the oil pump increase.
  Resolving method: 1 work as per the ruled oil raise. 2 work discontinuous.
2 the noise of the oil pump is so big.
  Resolving method: check whether the connecting axes of the oil pimp is homocentric. 2 check whether the screw is lax or dropped off.  If appear any problem as mention as above, pls recover it, then the machine can work normally.
3 strictly prohibit lacking phase in order to avoid burning generator.
4 the continuous working hours of the machine can not be over 150 hours, if the machine has working 150 hours without stopping, pls have the machine rest for 2 hours.  Our main products:
1. ZY series single-stage vacuum insulating oil purifier
2. ZYD series double-stage high vacuum transformer oil treatment plant
3. TY series vacuum turbine oil purification machine
4. TYA series vacuum lubricating oil filtration plant
5. LYE series waste engine oil recycling system
6. TYB series oil and water separator
7. CYA series centrifugal oil purifier
8. PL series plate and frame oil filter press
9. JL series portable oil purifier
10. IIJ-II series transformer oil dielectric strength tester







 
We can supply the best quality oil purification machine to you. Our price is competitive and we take responsibility to any quality uncertainty. We produce our products using only high quality raw materials and employ many skilled employees and technicians. For more product specification please contact us by email for a detailed catalog. Our factory can provide the most preferential profit to customers all over the world with competitive prices and high quality items.
 
Tel:+86-23-68060921
Web:china-oil-purifier.en.made-in-china.com
 
Posted by Ansen Zuo