High Efficiency Tumble Dryer Rotary Dryer

Introduction:The rotary dryer is composed of stove, main rotary body, which reduces the moisture from 60% to 10%. The moisture evaporating capacity of our rotary drum dryer can reach to (250kg per hour to 8000kg) per hour. Different density materials, the final product are not the same; Also for different moisture of raw materia

Featured Products

Introduction:

The rotary dryer is composed of stove, main rotary body, which reduces the moisture from 60% to 10%. The moisture evaporating capacity of our rotary drum dryer can reach to (250kg per hour to 8000kg) per hour. Different density materials, the final product are not the same; Also for different moisture of raw materials, which could get the different final capacity.
High Efficiency Rotary Drum Dryer Rotary Drying Machine


Models:
ModelDia of rollLength
of roll
GradientSpeed
(rpm)
Weight
(t)
Power
(kw)
Cubage (m³)
6GT- 0.6×8φ6008m3-585.14/6p2.26
6GT- 0.8×10φ80010 m3-57.26.94/6p5.02
6GT- 1.0×10φ100010m3-56.737.55.5/6p7.85
6GT- 1.2×12φ120012m3-55.813.111/6p13.31
6GT- 1.5×12φ150012m3-54.822.315/6p21.2


Features:

1). Air heating system is able to allow highly efficient removal of water from fresh harvested forage, and the maximum durability of dehydrated forage.

2). Non-pollution to the target materials guarantees minimal loss of their color, favor, and nutritional ingredients;

3). Smoke collector working with the air heating system adopts water-recycled wet-type collecting method, and ensures the exhausted gas to satisfy the environmental protection requirement as well as the lowest water consumption.


Working principle

The wet materials are conveyed to the hopper through the belt conveyor or bucket elevator, and then enter into the feed end through the hopper charger and the feeding pipe in sequence. The inclination of the feeding pipe must be greater than the natural inclination of materials in order to make the materials flow into the dryer smoothly. The dryer cylinder with slight inclination with the horizontal line.

The materials enter from the higher end, and the heat carrier enters from the lower ender; The two contact each other from opposite directions, but there are also circumstances that the heat carrier flows into the dryer body together with the material. Along with the rotation of cylinder, the materials run to the lower end due to gravity. In the forward movement of wet materials in the dryer body, the wet materials are heated directly or indirectly by the heat carrier to dry the wet materials, and then the materials are discharged from the discharge end through the belt conveyor or screw conveyor.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours